UBG-62-75T75S-4NV - 74 Gallon 75,100 BTU Ultra-Low Nox High Recovery Natural Gas Water Heater - 6 Year Warranty

The UBG-62-75T75 residential gas water heater meets Air Quality Management District Requirements for NOx emissions of 14 ng/j or 20 ppm. This model is equipped with a prewired, factory-mounted blower. This blower provides more efficient control of heat and helps ensure an adequate supply of make-up air. Prior to ignition, the control proves a working draft.

• 6-year limited Tank warranty, 6-year parts warranty for Residential applications
• 80% Thermal Efficiency
• 75,100 Natural Gas BTU Input per hour
• Factory-Installed Blower
  - Control proves draft prior to ignition
  - No draft hood or barometric damper required
  - Blower is factory-mounted with a 6-foot power cord: requires 120V, 3 amp or less electrical system connection
• Intelli-Vent™ Gas Control
  - Equipped with nearly indestructible silicon nitride hot surface ignitor
  - Advanced electronics for precise control of water temperature
  - Easy-to-understand system diagnostics
• Rated as Category I Appliance
  - Category I appliance: uses standard metal, single-wall or "B" type vent
  - May be common vented with other Category I appliances
  - Vent connects directly to blower outlet
• Fully Automatic Control System
  - Auto-reset gas shutoff device prevents excess water temperature
  - Adjustable thermostat with 120°F - 160°F range
  - Gas pressure regulator
• Glasslined Tank
  - Anode rods with stainless steel core provides additional corrosion protection
• Side Loop Connections
  - This model comes standard with side loop connections for optional hydronic heating loop applications
• CSA Certified and ASME Rated T&P Relief Valve
• Maximum Hydrostatic Working Pressure: 150 PSI
• 80% Thermal Efficiency
• Codes and Standards
  - Design-certified according to ANSI Z21.10.3-CSA 4.3 standars governing storage-type water heaters
  - California Energy Commission
  - Meets the thermal efficiency and standby loss requirements of the U.S. Department of Energy and current edition of ASHRAE/IESNA 90.1
  - Design-certified by Underwriters Laboratories
  - Certified for use on combustible flooring
  - Complies with SCAQMD Rule 1146.2 and other Air Quality Management Districts with similar requirements of 14 ng/j or 20 ppm